A transformer is an electrical alternating current or voltage is transferred from one circuit to another by electromagnetic induction. It is based on step and step down voltages designed. To select the right transformer you should remember certain things like the primary voltage and secondary voltage that is required, the required capacity in ampere-volt. Among other things the seismic requirement, impedance, secondary voltage or star-deltaLocation and space requirements, type of dwelling, etc.
The voltage is different in each country, as in the U.S. and Canada that runs on 110/120 and the rest of the world runs on 220/240 and industrial facilities can use 440-480. Most of the utilities, a customer with a service or a power supply system. One might wonder why anyone would need a transformer. Suppose that a new industrial platform in town. They have a lot of engines in use in their activities to provide 480Y/277 volt three-phase system. Thiscares for them the motor load at 480 volts and their office and factory lighting loads to 277 volts. But their office equipment and light bulbs, they need to operate 120 volts. They also have some small power motors that want to operate at 208 volts. Since the program can only give with 480Y/277 volt three-phase system, they need a transformer, the rest, there must be. A buck boost transformer is the ideal solution for changing line voltage by smallQuantities. Single-phase transformer is used mainly in rural areas. These are used in rural areas is high because the cost of three-phase transformer and engine loads are small. The use in shopping malls, factories, large buildings three-phase transformers. The incoming electric transformers voltage is an important factor. The three main frequencies of 50 Hz, 60 Hz and 400 Hz, 400 Hz for high power applications such as aviation and space technology.
The transformers are highlyefficient. A large power transformer has efficiency as high as 99.75% and small transformers have less than 85% efficiency. When you overload a transformer excessive temperature can cause overheating which result in rapid deterioration of the insulation and cause complete failure of the transformer coils. Thermometers are the best way to determine the temperature. Touch is a poor indicator of proper operating temperature for transformers. Properly designed transformers can reach 50 degree Celsius above ambient temperature. In an ambient temperature of 20 degree Celsius, the total temperature can reach 70 degree Celsius, which is too hot to touch.
For harsh environments, whether indoor or outdoor, it's critical that a transformer's core/coil, leads, and accessories be adequately protected. Dry-type transformers are available for either indoor or outdoor installation.
No comments:
Post a Comment